Neat cutting oil
Transparent, light-colored. It has 3 functions. Not only it can be used as lubricant of machine tools, but also it can be hydraulic transmission oil of machine tools. It contains special EP additive without oily be soiled, anti-rust additive, antioxygen and non-atomized additives.
1.It adopts all kinds of high-tech machine tools to reduce the sintering between the metal and cuuters and reduce the friction. The perfect cooling property can improve the speed of working. Not only that, it’s transparent so it’s easy for us to observe the working face clearly.
2.We improve the no corrosion additives with clean surface to ensure not leave dirt on the workpiece. It can prevent parts and cutters from overheating and “blueness”.
3.The extreme pressure additives can reduce the cost of maintenance. And it will react chemically with the interface of knife and blade. Forming an effective lubricating film to prevent metal from direct contacting with metal and reduce friction. It will not cause chemical reaction with machine tool hydraulic system. The special preservative and antirust additives can give an overall protection. In addition, it contains very special additives of atomization resistance to reduce the liquid droplet concentration and make the workshop safer and cleaner.
4.One oil can be used in three ways. This product can keep promise of trouble-free use and deal with the problem of pollution. For example, the dilution of cutting oil will reduce the EP property, influence the work performance of machine tool and reduce the use-life of cutters. Besides that, it goes without saying this product can reduce the amount and kind of inventory.
1.All middle difficult procession. It adopts all steel procession and ferroud metal procession from easy to difficult processing.
2.It is very suitable for processing the copper, copper alloy and many steel because of the perfect EP additive without dirt.
3.Modern machine tool, such as automatic screw machine, the machining center of numercial control or computer numercial control, machine tool lubricant and the equipment of hydraulic fluid.
4.It may cause the cutting oil, lubricant and hydraulic fluid are mixed together because of leakage.
5.Normal process, especially for the new and high technology processing machine tool with high working speed. You should be based on the requirements of hydraulic fluid and the intensity of mechanical processing to choose the product levels. The higher intensity of processing, the higher viscosity of cutting fluid. The safe and environmental product is attached to the MSDS of SKALN and safety tips for user. Users should follow the prescribed steps and comply with the relevant laws and regulations to use and sewage.
Color Grey Grey Grey Grey
Flash point,COC,℃ 200 227 300 230
Viscosity,mm2/s@40℃ 36.6 69.5 36.7 70.2
Sulfur content % 0.7 0.7 1.1 1.1
Copper corrosion(3 hours)
≤ 1B 1B 1B 1B