ComPound KS-8012 rust preventing oil

SKALN ComPound KS-8012 rust preventing oil Product introduction:

SKALN ComPound KS-8012 rust preventing oil is refined by anti-rust additives with high melting point wax paste and special permeability and water displacement ability. Mainly for the iron with the long-term protection ,general anti-rust period can be up to 2 years.

SKALN ComPound KS-8012 rust preventing oil Applicable scope:

1.Before processing / when processing, exposed directly to the atmosphere of steel objects or finished products after processing.

2.Anti - rust coating for traffic vehicles

3.Traffic transformer shell

4.Bridge and pontoon

5.Storage tank (non food)

6.Non-soft water tank

7.Ballast box

8.Gas cabinet

9.Lifting equipment

10.farm tools

SKALN ComPound KS-8012 rust preventing oil Performance advantage:

Environment: health and safety:

rust preventing oil is attached with SKALN Material Safety Data Sheet (MSDS). The user should follow the required procedures and follow the relevant laws and regulations and discharge method.

Long-term anti-rust function:

The paraffin paste and special additives allow the product to form a non-hardened \ self-sealing protective film on the surface of the protected metal to prevent the contact of the effective chemical element with the metal surface. Good water displacement to ensure the protective film also has a waterproof feature. An special antirust agent makes the product has the greatest antirusting ability. Good penetration characteristics make it can penetrates into the slit which common protective agent is very difficult to reach . That means using this product is non harmful.

Lowest Surface treatmentrequirement:

rust preventing oil has a strong penetration ability, can penetrate directly through the thick layer of thick rust, so before apply this product on the metal surface is almost no need to do grinding treatment, can be directly applied. Strong penetration capacity also makes the metal rust layer easier to remove. Of course,Treating directly on metal surface which is not very serious rust , dosage will increase undoubtedly,that’s a economical problem.

Low cost:

The protective film formed by this product has a very strong self-sealing characteristics, so even if there is scratches or brush, there is no need to repair the protective film, so that from the perspective of rust, the total cost of using this product is lower than the cost of using ordinary protective paint.

Easy to eliminate:

The soft protective film formed on the metal surface of this product can be easily washed off with petroleum solvent or kerosene.

SKALN ComPound KS-8012 rust preventing oil Parameter:

SKALN ComPound KS-8012 rust preventing oil Using Method:

Can be used with a brush, dipped and sprayed method.