Common rust preventing oil

Common rust preventing oilis Low viscosity penetration. Rust more than a quarter. Made of mineral base oil, fatty acid additives and solvents, with good permeability characteristics, lubrication characteristics and rust removal capacity.

Common rust preventing oil Product feature

1.protection for inaccessiblearea:

After applying to the metal surface, the solvent will transport lubricants and fatty acid additives to the gap and rustarea, before the solvent evaporate,the next layer of lubricant filmwii covermetal surface,preventing wear on the abrasive surface.Fattyoil has a good anti-rust special pieces, to prevent the emergence of new rust.

2.Eliminate noise

Common rust preventing oilhas a strong penetration capability, can use lubricant to penetrate into the narrowest space and form a thick enough to lubricate the film, thereby reducing the wear before the moving parts, eliminating the noise.

3.The rusty nut easier to loose

This product is extremely permeable, It can pass through the rust layer, so that rusty nuts, bolts and screws more easily turn.

Common rust preventing oilapplication method can be divided into three types:

A. Soak, the need to rust-proof products soaked in anti-rust oil, and then remove and drain

Note: If the anti-rust oil viscosity is too high, this method is not suitable, but It can be high-thick anti-rust oil heating, lower viscosity, easy to soak drain

B. Brush, brush the rust-proof oil on the product surface

C. Spray, spray the rust-proof oil on the metal surface. Many customers will use this simple method.